The actual Trex decking boards are available in 1 or 2 inch thick boards. The three main types of boards are the Fascia, Grooved Edge and Square Edge. The Fascia is available in either 8 inch or 12 inch long boards. The boards are 0.75 inches thick and 11.375 inches wide. What thickness is vinyl flooring? 8mm vinyl flooring.
How thick are composite deck boards?
Most manufacturers offer composite decking boards in 12′, 16′ and 20′ lengths. The width varies by brand and style and can range from one to two inches thick and four to six inches wide.
What is the standard thickness of decking?
So what size are deck boards made of different types of wood? The standard thickness for all types of wood is 1”, however, for weaker woods, choosing a thicker board can give you a sturdier feel.
What are the three levels of Trex decking?
Trex deck design comes in three types: Select, Enhance, and Transcend. You can’t go wrong with any type of decking from Trex, but we’ve created a chart to help you decide which type is best for your needs.
Can you put a fire table on a Trex deck?
You should not place your fire pit directly on your composite decking. Trex decking can soften and become damaged at temperatures as low as 176F. A temperature barrier can be bricks, stone or ceramic tiles or fire mats.
Can I use 1x6 for deck boards?
Width of material: We recommend only 1×4, 5/4×4 or narrower boards. Never use 1×6 or 5/4×6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.
What is the thickest composite decking?
|Decking Type||Actual Thickness (inches)||Suggested On Center Joist Spacing (inches)|
|Pressure Treated Pine 5/4||1”||16”|
|Western Red Cedar 5/4||1”||16”|
How thick is a 1x6 deck board?
|1×6||3/4 x 5-1/2|
|1×8||3/4 x 7-1/4|
|1×10||3/4 x 9-1/4|
|1×12||3/4 x 11-1/4|
What is the most common deck board size?
The most common or standard deck board width is 6-inch wide planks based on square-foot coverage, labor, and material cost.
What is a 5 4 inch board?
5/4 lumber is lumber that was rough sawn to 1 1/4 inch. When it is finished planed as you would get at a retail lumberyard, it will measure about 1″ though that can sometiimes vary upward.
How many Trex boards do I need for a 12x12 deck?
|Board length||Boards required|
What is the difference between the different grades of Trex?
The Three Lines of Trex Composite Decking Trex offers three tiers of composite decking—Transcend, Enhance, and Select. These are considered “good,” “better,” and “best,” with Transcend being best, Enhance being better, and Select being good.
What is the difference between Trex Transcend and select?
The surface of Trex’s Select line has a different look than Enhance or Transcend. Instead of the wood-streaking look, Select features a textured wood-grain look on the surface of the board, without the deeper grooves of Enhance or Transcend.
Can I put Grill on Trex deck?
Yes, Gas grills are safe to use on a composite deck. Composite decking is designed to a minimum of Class C fire rating similar to wood decking. … As an extra layer of protection, people will often place a grill mat or pad to protect the decking from both heat and spills.
Can a fire pit be used on a composite deck?
Fire pits, both wood-burning, and gas can be used safely on wood or composite decks provided they are placed a sufficient distance from adjoining structures such as the home, and a heat-resistant barrier is used between the fire pit and the deck to prevent potential structural and cosmetic damage due to the high-heat …
How flammable is Trex?
Trex decking is classified as a Class C, or Class III, building material. As a result, Trex lumber will burn as wood does, even though it contains several other composite materials. … So if a fire occurs, your Trex lumber will burn just like the wood on any traditional wood deck.
Is 2x6 good for decking?
2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. … Most decks use 16″ on center spacing for joists. Most decking is not strong enough to support longer spans than 16″.
What size boards are best for decking?
Width: Six-inch wide boards are ideal in most cases. Four inch wide material takes longer to install, creates more gaps and requires a lot more fasteners—but you can use it. Eight inch wide boards, because of their greater width, have more of a tendency to crack and cup; avoid using them.
Can I use 2x6 for decking?
Can I use 2×6 for deck joists? – Quora. If the span is only 8 ot 9′ then yes, they will work. You would be better to check the national building code – joist spacing – before you buy your lumber. LLive loading on a deck is estimated at 40 pounds per square foot (10 psf for static load) usually.
What is the thickness of a 5 4 deck board?
2×6 Deck Boards5/4 DeckingThickness1 ½” (38mm)1″ (25mm)Joist Spanning24″ (600mm)16″ (400mm)Weight2.36 lbs (1.07kg) lnft*1.59 lbs (0.72 kg) lnft*Profile cutSquare CutRounded Radius Edge
Why is it called 5 4?
It simply refers to how many 1/4-inches thick the rough stock is. For example, 4/4 (read out loud as four-quarters) is 1-in. thick in the rough. 5/4 is 1-1/4-in.
Can Trex be used on a dock?
An innovator in the world of decking, Trex is a leading manufacturer of composite decking boards. Unique processes combined with a variety of styles make Trex decking a great choice for a stylish deck or dock that is built to last.
What does a 1x6 actually measure?
A 1×6, for example, actually measures 3/4″ x 5 1/2″. In this case, the planing is necessary for a smoother surface, so that the board could be used for interior applications. The length of the boards is generally exactly what you order, though we usually only stock pieces of even lengths.
What is the actual size of a 1x8 board?
Nominal SizeActual Size1 x 63/4 x 5 1/2 inches (19 x 140 mm)1 x 83/4 x 7 1/4 inches (19 x 184 mm)1 x 103/4 x 9 1/4 inches (19 x 235 mm)1 x 123/4 x 11 1/4 inches (19 x 286 mm)
How wide is a 6 inch deck board?
Nominal SizeActual Size5/4 × 61″ × 5-1/2″6/4 × 61-5/16″ × 5-1/2″
Is it better to nail or screw deck boards?
The Consensus: For a deck build it’s best to use a combination of nails and screws. … Screws are superior for laying down the decking. They hold things flush better and have a better fastener/tensile strength, which keeps boards from popping up over time.
What decking boards are best?
- Softwood Decking. Softwood is the cheapest decking material you’ll find; it has a beautiful natural aesthetic and is most commonly cut from either redwood or larch. …
- Hardwood Decking. …
- Composite Decking. …
- Antislip. …
- Decking Boards. …
- Decking Kits. …
- Decking Tiles.
What is a 4 4 board?
So, a “4/4” board is four quarters, or 1 inch thick, an “8/4” board is eight quarters, or 2 inches thick, a “10/4” board is ten quarters, or 2.5 inches thick, etc. Board Foot: Rough sawn lumber is usually sold by the “board foot” (bd.
How wide is 5 quarter board?
x 6 in. x 16 ft. Standard Pressure-Treated Decking Board.
How far apart should deck boards be?
Proper wood deck board spacing should have at least a 1/8 inch gap after the decking has dried out. If you install your wood or treated deck boards while they are still wet boards, then they should be attached without a gap between them.
How much does it cost to build a 20x20 deck?
The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
Are Trex decks worth it?
Composite decking is worth the money. It costs more upfront, but thanks to minimal maintenance costs and long life, the annual cost for the life of the fence is significantly cheaper for composite materials. If what you have in mind are the Trex decks of 15 years ago, you’d be surprised to see how far they’ve come.
How much should a Trex deck cost?
Trex decking costs $1,600 to $9,600, averaging about $4,800. That’s $5 to $12 per square foot for just decking boards and $5 to $15 per square foot for installation. Size is the biggest price factor, with 144 square feet ranging from $1,440 to $3,900 compared to $3,000 to $8,100 for 300 square feet.
Is Trex Transcend capped on 4 sides?
The advantages the cellular PVC capped products have is the have less heat retention, no wood or organic materials, much lighter in weight. Trex Transcends is a capped composite (has wood filler) with the cap on 3 sides. … This product is capped on all 4 sides and does not have any wood content in it.
What is the difference between Trex Enhance and Trex Basic?
For spring of 2019, Trex has introduced its lowest-priced composite flooring yet – the “Enhanced” flooring in the “Basic” color line. … The price of the Enhance “Natural” color boards increases to slightly higher than the next product line; ”Select”. Select. The “Select” flooring is now the “mid-grade” product.
How do I choose a Trex?
Consider the Color of Your Home Trex decking comes in three different color families: grays, browns and reds. If your home is a warm beige, tan or off-white, choose from the brown and red families. If your home has cool undertones of gray, stark white or blue, stick with colors from the gray family.
Does Trex Select scratch easily?
The short answer is yes. Trex decking features a hard shell that not only resists scratching but is also formulated to withstand long-term exposure to the elements with less maintenance than wood decking.
Can dogs scratch Trex decking?
It is resistant to abrasion and scratches and absolutely dog-proof. It is also slip-resistant ever after a pouring rain. It also does not absorb heat which makes it a great lounge area for your dogs.
Is Trex Select slippery?
Trex decking is a low-maintenance decking solution that requires a fraction of the work of wood decks and is less likely to get slippery when wet. It still requires occasional attention to keep it looking its best, but you’ll be delighted with the finished results.
Can you put a rug on a Trex deck?
“Most area rugs aren’t a problem with Trex decking, but we do recommend cleaning underneath them regularly. … “Never use a rug or mat with a rubber, vinyl, or latex backing. Any of these products could leave marks on your composite or PVC decking. Use high-quality polypropylene mats or colorfast woven rugs only.”
What is the lifespan of Trex decking?
Trex and TimberTech Composite Decking Warranties Composite decks have a lifespan of at least 25 to 30 years — and they have warranties to match.