Counter-depth refrigerators are typically under 30 inches deep. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range. So, in many kitchens, traditional refrigerators may stick out half a foot or more from the edge of the kitchen counters. What is the depth of a dresser? standard dresser dimensions.
How deep should a counter depth refrigerator be?
Your counter-depth measurement should be about 24-25 inches. This dimension is equivalent to the depth of the refrigerator box, excluding the refrigerator doors and handles. Keep in mind that refrigerators need some breathing room on all sides to run efficiently.
What is the difference between standard depth and counter depth refrigerator?
Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.
What is normal counter-depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.
Do counter depth refrigerators stick out?
If you do not have a counter-depth refrigerator, your standard fridge will stick out 6″ or more from the counter. A counter-depth fridge will only stick out as much as the door depth, typically just a few inches.
Why are counter depth fridges so expensive?
Manufacturers often use thicker, more expensive insulation materials to maximize interior space. This contributes to their higher price. There are many styles of counter-depth refrigerators, including French door and side-by-side models.
How far should a refrigerator be away from the wall?
The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.
What is the average depth of a refrigerator?
Refrigerators are categorized between counter-depth and standard-depth models, with refrigerator depth ranging from 24 to 36 inches deep. Counter-depth fridges align with the edges of countertops and measure between 24 to 30 inches deep, whereas standard-depth appliances may extend to 30 to 36 inches.
Why are fridges not counter-depth?
While the refrigerator box is technically counter depth, all fridges need clearance in back, doors, and handles. … Rather, it is a matter of establishing a common frame of reference for what we mean by counter-depth. In any case, these fridges are shallower than your average fridge, which can run several inches deeper.
What size cabinet goes above a fridge?
In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits. Where the cabinets run all the way to the ceiling, 48-inch cabinets are the logical choice. A 12-inch or 15-inch tall cabinet fits neatly over a refrigerator.
Does fridge depth include doors?
The depth of a refrigerator is the measurement from the back of the unit to its front and does not include its door handle. In comparison, a standard or full-size refrigerator has more depth, which makes it stick out farther from the surrounding cabinetry.
Will a pizza box fit in a counter depth refrigerator?
Yes you can fit everything in a new counter depth model, but to fit it all, you can go with the side-by-side in the Whirlpool Ice collection or choose one of many other options especially from Kitchenaid.
What is the best month to buy a refrigerator?
The best time to buy appliances is when new models roll out: washers, dryers, and dishwashers in September and October, refrigerators in May, and ranges/ovens in January. When manufacturers unveil the latest models, retailers reduce prices on models from previous years at these times to create more room for new models.
Do counter depth refrigerators cost more?
Counter-depth appliances typically cost about 15 to 20 percent more than standard refrigerators that have comparable features, and it is not uncommon for the appliance to be slightly smaller in capacity.
How much gap do you need around a fridge?
Remember to leave 25 mm of free space around the top, back and sides to allow for the heat produced during refrigeration to escape. Be sure to also measure clearance (entryways, doorways etc.) to ensure that when your fridge is delivered it will fit safely into the home, and your old fridge can be safely removed.
A hidden hinge, also known as a concealed hinge, is a hinge that can’t be seen when viewing the door from the front and/or side. If you have seen European-style hinges, you have seen concealed hinges. They are designed to create an aesthetic look, one that is seamless and can be made to match cabinetry, if needed.
How much space should be in front of fridge?
Plan for Sufficient Counter Space The National Kitchen and Bath Association offers these guidelines for minimum landing space: Near the fridge and wall oven, leave 15 inches on both sides (if necessary, one side can be 12 inches).
Is 2 cubic feet a lot in a refrigerator?
A family of two needs 8 to 10 cubic feet of fresh-food space. Add an extra cubic foot for each additional family member.
What size opening do I need for a 36 inch refrigerator?
1-8 of 8 Answers. The unit is 35 and 3/4 inches wide. If you’re installing next to a wall, you’ll need a minimum clearance of 3 and 3/4 inches for the door.
Are French door refrigerators deeper?
In addition to being inconvenient, this also wastes energy because the door is open longer. French door refrigerators have a much more logical layout, including deeper door bins. … Wider than most traditional models – French door refrigerators are typically wider than a traditional double door fridge.
Can you put fridge in corner?
We put refrigerators in corners for various reasons. First, they won’t block the light or sight-lines if they are in the corner. Additionally, when the fridge doors are open, they won’t impede traffic. … Having the fridge tucked into the corner will help you avoid that.
What is the most shallow refrigerator?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.
What is the standard cabinet opening for a refrigerator?
The standard opening for a refrigerator is usually 36” wide and the wall cabinet over it is usually 36” in width.
What is the standard depth of kitchen wall cabinets?
Wall cabinets: Hang on wall. Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.
Which is bigger standard or counter depth?
Standard depth refrigerators take up more space, generally running 30 to 34 inches in depth, or 35 to 36 inches when the doors and handles are included. … Counter depth refrigerators are shallower and wider than standard depth refrigerators, with a depth range of 23 to 27 inches.
How do I put my fridge next to the wall?
Space Between Refrigerator and Side Wall You should allow for a ½ inch to 1 inch of extra space between the refrigerator and side walls. Allow the same amount of clearance at the top. The refrigerator distance from the back wall should be a bit more, about 1 to 2 inches.