Pop rivets, also known as blind rivets, are a type of rivet. They are used in applications where there is limited – or no – access to the rear side (blind side) of the parts to be joined.

What is a pop rivet and how does it work?

A pop rivet is also known as a blind or hollow rivet and is used where you are only able to work with one side of the rivet. A special pop rivet gun or tool pulls the mandrel head into the body of the rivet, which then expands against the blind side of the join.

What is a pop rivet tool? A pop rivet gun is made to apply pop rivets to a workpiece, and was invented in 1916 by Hamilton Wylie. This type of rivet gun is unique in its operation, because it does not hammer the rivet into place. Rather, a pop rivet gun will form a rivet in-place.

Are pop rivets permanent?

Pop rivets consist of two parts. … Once gripped, the mandrel snaps, permanently holding the rivet in place. This results in a localised joint.

How is a pop rivet installed?

To install rivet nuts without a tool, you will still need more than just your bare hands. You will also need a bolt that 1) has its own nut, and 2) can fit into the rivet nut. You should also have a washer or larger bushing that can fit around the bolt fairly tight.

How much does a pop rivet gun cost?

This item ARES 70017 – Professional Pop Rivet Gun with 60 Rivets – Rivet Sizes 3/32-inch, 1/8-inch, 5/32-inch, & 3/16-inch – Applications Include Sheet Metal, Automotive, and Duct Work
Price$1999
ShippingFREE Shipping on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
Sold ByARES TOOL

When would you use a pop rivet?

Pop rivets, also known as blind rivets, are a type of rivet. They are used in applications where there is limited – or no – access to the rear side (blind side) of the parts to be joined.

Are rivets stronger than screws?

For typical workshop applications, where pop rivets are usually used, threaded fasteners will provide superior strength. Pop rivets use a hollow shaft, reducing their ability to resist shear loads. … By contrast, solid rivets are perhaps the strongest mechanical fastener available.

What are the strongest pop rivets?

Also, aluminum rivets with aluminum mandrels are the least strong; aluminum rivets with steel mandrels are stronger; steel rivets with steel mandrels are stronger still; and stainless steel rivets with either steel or stainless steel mandrels are the strongest.

Can you install a pop rivet without a gun?

To install rivet nuts without a tool, you will still need more than just your bare hands. You will also need a bolt that 1) has its own nut, and 2) can fit into the rivet nut. You should also have a washer or larger bushing that can fit around the bolt fairly tight.

What is the difference between a blind rivet and a pop rivet?

Pop rivets are used in a blind setting like blind rivets, but the material application is a little different. Pop rivets can be used with plastic, metal and wood while offering a longer-lasting setting than traditional blind rivets developed outside of the lab of the George Tucker Eyelet Company.

How long should a pop rivet be?

The length of the rivet should be equal to the thickness of both objects you are fastening, plus 1.5 times the diameter of the rivet’s stem. For example, a 1/2-inch diameter rivet being used to fasten two one-inch thick plates will have to be 2 3/4 inches long.

What are the three types of rivets?

There are four basic types of rivets; tubular, blind, solid and split.

Do you need a pop rivet gun?

Pop rivets are effective in wood, metals, and even plastic, but you have to use a pop rivet gun to install them. There are different types of pop rivet tools, and it is important to choose the right tool for the application. Like any blind rivet, pop rivets are designed to be installed from one side of the workpiece.

Can you rent a rivet gun?

Sunbelt Rentals equipment is maintained to ensure it’s ready for your job. Rent Rivet Gun with confidence from Sunbelt Rentals. If anything goes wrong with your Rivet Gun Rental, we guarantee a working replacement on-site within hours.

How do you remove a pop rivet?

The only way rivets can be removed is essentially by destroying them. The easiest way to do this is by “drilling out” the rivet–using friction from a drill bit to cut away at the inner wall of the fastener, separating the shaft from the head. I always recommend using titanium drill bits to do this.