1. Step 1: Shut Off the Power to the Circuit.
2. Step 2: Install a Double Switch Wall Box and Run the Feed Cable.
3. Step 3: Run Cables from Wall Box to Light Fixture Locations.
4. Step 4: Attach Pigtails to the Switches.
5. Step 5: Join the Ground Wires.
6. Step 6: Connect the Hot Feed Wires.

How do you wire in parallel? Method 2 Building a Parallel Circuit with Wires and a Switch Choose this method for a slightly advanced project. Gather the main components of a parallel circuit. Prepare your wires. Connect the first lightbulb to the battery. Begin to connect the switch to the battery. Connect the switch to the first lightbulb.

## how do you wire multiple light sockets?

You run another 12/2 or 14/2 cable from the top of the switch box to the first light. You connect the black wire to the switch. You connect the 2 white wires together, and then connect the other terminal on the switch to the black wire of the cable leaving this junction box towards the first light.

Should outlets be wired in series or parallel? It's common to describe household wall receptacles that are wired together using the device terminals as wired in series. But, in fact, all household receptacles are always wired in parallel, and never in series. In a series circuit, current must pass through a load at each device.

## how many lights can I daisy chain?

Unscrew the plate cover on the wall and look at the switch. The wattage is marked on the switch. Then divide that number by the wattage of the bulbs you're using to determine how many bulbs you can connect to this chain. Common switch wattages are 300, 600, and 1,000.

How many outlets can be on a breaker? By rule of thumb you would stick with 8 to 10 outlets and or lights per breaker. Now this is of course they are 120 volts 60 Hz (USA or Canada).

## how do you wire two light switches together?

If you've mounted two switches in the same electrical box, prepare two black wires. Connect one end of the 6-inch wire to the top terminal of the first switch. Twist the other end together with the black wire from the incoming circuit cable and the black wire from the cable going to the second switch to form a pigtail.

Can I wire lights and outlets on the same circuit? An option for you if you don't want two switches is just to use a blank face plate (check this question). Basic answer to your question of can a mixture of lights and receptacles be installed on a single circuit is yes. The neutral will be white but some switches are wired up with a white wire that is not a neutral.

### How many lights can I put on one switch?

A maximum of 96 lights you can connect in parallel but to prevent the risk of unnecessary sparks and arc when operating the switch with having moisture on the switch or you hand, you can connect less than the maximum or you can use several switches instead.

How many outlets and lights can be on a 15 amp circuit? for a 15 amp circuit this allowed for 10 outlets and on a 20 amp circuit 13 outlets were allowed.

### Can two separate circuits be in the same junction box?

2 Answers. The answer is yes you can have 2 separate circuits in the same box (they can have a splice also but not needed in your case). The only concern would be the total box fill.