The running configuration is stored in RAM; the startup configuration is stored in NVRAM. To display the current running configuration, enter the show runningconfig command. Enter the copy runningconfig startupconfig command to save the current running configuration to the startup configuration file in NVRAM.

How do I save my running config?

Save the Configuration Type “copy running-config startup-config” at the command line and press return on the keyboard. This will copy the current switch configuration to the non-volatile memory, which is memory that will retain its data even without power applied to it. Dec 7, 2011

How do I download Cisco running config?

Downloading Startup and Running Config Files from Cisco Devices Click the Tools tab. Choose Config File Manager available under the CISCO Tools category. To configure SNMP properties click Settings located at the top right corner or click Admin -> Settings. … Enter the Device Name or its IP Address. More items…

How do I save my Nexus config?

To change the startup configuration file, you can either save the running-configuration file to the startup configuration using the copy running-config startup-config command or copy a configuration file from a file server to the startup configuration. Jul 13, 2017

Where is the running configuration stored?

The running configuration file stores the configuration changes made while the router is up and running. The “”running-config”” file is stored in RAM.

What is the command to save the running config to startup config?

To display the current running configuration, enter the show running-config command. Enter the copy running-config startup-config command to save the current running configuration to the startup configuration file in NVRAM. To display the startup configuration, enter the show startup-config command. Nov 2, 2007

How do I copy TFTP to running config?

Log in > Go to enable mode > issue a “copy tftp running-config”* command > Supply the IP address of the TFTP server > Give the backup file a name. Note: You can also use startup-config to restore the config saved in NVRAM rather than the running-config.

How do I download config files?

To download a configuration file: Go to Device Manager > Device & Groups and select a device group. In the lower tree menu, select a device. … In the dashboard, locate the Configuration and Installation Status widget. In the Total Revisions row, click Revision History. Select the revision you want to download. More items…

What command is used to create a backup configuration?

What command is used to create a backup configuration? Explanation: The command to back up the configuration on a router is copy running-config startup-config.

How can I download config file from TFTP server?

Step 1: Copy the configuration file to the appropriate TFTP directory on the workstation. Step 2: Verify that the TFTP server is properly. Step 3: Log into the access point through a Telnet session. Step 4: Download the configuration file from the TFTP server to configure the access point.

How do I save my Nexus 9k config?

To change the startup configuration file, you can either save the running-configuration file to the startup configuration using the copy running-config startup-config command or copy a configuration file from a file server to the startup configuration. May 31, 2017

How do I delete a Cisco Nexus config?

Procedure Erase the existing configuration: write erase. Reload the switch software: reload. The system reboots and enters the configuration wizard. … In the configuration wizard, enter the basic switch settings: Admin password. … When prompted, enter the user name and password to log in to the switch.

How do I reset my Nexus switch?

For Cisco Nexus 5000 Series switches, you must press Ctrl-R (Ctrl+Shift+R). switch# reload This command will reboot the system.

What is running configuration?

The running-configuration is the config that is in the router’s memory. You change this config when you make changes to the router. Keep in mind that config is not saved until you do a copy running-configuration startup-configuration. This command can be abbreviated sh run. Jun 12, 2008

What is the difference between write memory and copy running config startup config?

They essentially achieve the same things by saving the running configuration to the memory so that after a reload it retains the same configuration. Write memory is the “ancient” way, and copy running-config startup-config is the “newer way”. … – as opposed to just saving the configuration. Aug 5, 2018

Do show running config?

Show running-config: To display the configuration information currently running on the terminal, use the show running-config EXEC command. This command replaces the write terminal command. Syntax Description: This command has no arguments or keywords. Nov 29, 2013

What is the shortest version of copy running config startup config?

What is the shortest, abbreviated version of the copy running-config startup-config command? The shortest, abbreviated version of the copy running-config startup-config command is “copy run start”.

How do I get rid of running config?

To clear out the running config file, simply erase the startup config file and then reload the device. Sep 10, 2019

How do I save a running config in putty?

Backup Cisco Configs Using Putty Launch putty and connect to your Cisco router/switch. … Go to Session and click on Logging, select “Log all session output” Click on Browse and choose the location and name of the file (I like to place my config file on my desktop – C:\Documents and Settings\Administrator\Desktop\config.txt) Jun 12, 2012

What is a TFTP server?

TFTP Server is used for simple file transfer (typically for boot-loading remote devices). Trivial File Transfer Protocol (TFTP) is a simple protocol for exchanging files between two TCP/IP machines. … The TFTP Server can also be used to upload HTML pages onto the HTTP Server or to download log files to a remote PC.

What does copy run start do?

copy run start generates a new configuration file and overwrites entirely the previous configuration file. … This means that running configuration lines that aren’t in the startup configuration won’t be overwritten or removed. The result is usually a messy, incomplete configuration. May 17, 2010

How do I download OpenVPN config file?

Where Can I Download OpenVPN Configuration Files? Visit our Servers page. OpenVPN configuration files are located on our Servers page and you can visit it by clicking (this link) Choose a server location. Once on Servers page, scroll down to choose a server location you would like to connect to. … Download configuration files. Aug 27, 2019

How do I open a config file?

Programs that open CONFIG files File Viewer Plus. Free Trial. Microsoft Visual Studio 2019. Free+ Adobe Dreamweaver 2020. Free Trial. Microsoft Notepad. Included with OS. Microsoft WordPad. Included with OS.

How do I import a config file into FortiClient?

Restoring a Forticlient configuration file Download the FortiClient using one of the following links: After Installation, Open the FortiClient, and go to File -> Settings: Go to Restore: Choose the config file you want to upload: After approval, you will be prompted by the following: Go to View -> Dashboard : More items…

How do I backup my switch configuration?

Use an FTP Server to Backup and Restore a Configuration At the Router> prompt, issue the enable command, and provide the required password when prompted. … Configure the FTP username and password. … Copy the configuration to the FTP server. … Open the configuration file with a text editor. Aug 3, 2006

How do I backup my router settings?

How to backup and restore the settings configured in a router Log in to the router. By default, User Name is “admin” and Password is “password”. In the menu, under Maintenance, click Backup settings. Click the Backup button. Then select a location on your PC to save the file.

How do I find the config file on my router?

Download a config from Cisco router or switch Click Select Router, and then specify the IP address or host name of the device. Select community string, or SNMP version 3 credentials. To test the credentials, click Test. Click OK. If prompted, store the credentials you specified in the shared credentials database. Click Download. More items…

How do I upload a config to a Cisco switch?

Connect to the switch/router that needs the configuration. Open the config.txt file. Highlight the entire contents of the config.txt file. … Copy the selected text to the Windows clipboard. … Switch to the HyperTerminal window, and issue the configure terminal command at the Router# prompt. More items… • Aug 29, 2014

How do I backup configuration files in Hana?

For third-party backup tools (Backint for SAP HANA), the backup destination is always /usr/sap//SYS/global/hdb/backint for both data backup and log backups. For third-party backup tools, you can only change the log backup interval. Specify a size limit for the data backup files (if required).

What is copy running config startup config?

Copy running-config startup-config or copy run start command copies the current active configuration to NVRAM. d. Erase startup-config will enable you to completely delete all configurations on the router so that you can start from scratch. Type this command to delete the configuration file in NVRAM.

How do I check logs on Nexus switch?

To view your switch logs or related configuration information, use any of the following commands: show logging console. … show logging last number. … show logging logfile [ start-time yyyy mmm dd hh : mm : ss ] [ end-time yyyy mmm dd hh : mm : ss ]

How do I delete a VLAN DAT file?

Deleting the VLAN Database from a Cisco Switch 1) Deleting the switch configuration. This is the easy part. … Switch#erase startup-config. … Switch#reload. 2) Deleting the switch Vlans. … Switch#show vlan brief. … Switch#show flash: … Switch#delete vlan.dat. … Switch#sh flash. More items…

How do I reset my Cisco 3560 to factory settings?

First you need to power down the switch. Once the switch is powered off, hold down the mode button, and power the switch on. The switch will boot up and you should see the switch prompt as shown below. Sep 29, 2015

How do I reset my Cisco 3750 to factory settings?

There is another method: Break the stack; Power up the switch individually; Hold down the “Mode” button for 30 seconds and release; The switch will reboot into factory default; Console into the switch; Delete the files VLAN.dat, VLAN.dat.backup, config.text, config.text.backup. Renumber the stack. Oct 11, 2016

How do you reset a 2960 switch?

Procedure to reset a Cisco 2960 (or 2950) to factory defaults by deleting the configuration files. Connect the blue console cable, and open a TTY session: 9600,8,n,1. – Hitting return should give a prompt, confirming the connection. Press and hold the front panel MODE button, and power-up the switch.

How do you reset a 3850 switch?

Power cycle the switch. Immediatly press and hold the Mode button. Hold the button for approximately 12 seconds, the Status LED will go amber. On the console you should be in Boot Loader. Jan 6, 2017

What is the command to reset a Cisco switch?

Reset a switch running Cisco IOS Software to factory defaults Enter “enable” mode by typing: … The console prompt should change from “switch>” to “switch#” to signify this. To reset the switch to factory default, issue the erase startup-config or write erase command. More items… • Mar 7, 2018

What is show startup config?

For all platforms except the Cisco 7000 family, the show startup-config command shows the version number of the software used when you last executed the copy running-config startup-config command. … The Cisco IOS software informs you whether the displayed configuration is a complete configuration or a distilled version.

Why would a technician enter the command copy startup config running config?

Why would a technician enter the command copy startup-config running-config? … Changes to the configuration on an IOS device take effect as soon as the command is typed correctly and the Enter key has been pressed. A network administrator has forgotten the argument of an IOS command.

What is the difference between running configuration and start up configuration?

A running configuration resides in a device’s RAM, so if a device loses power, all configured commands will be lost. … A startup configuration is stored in the nonvolatile memory of a device, which means that all configuration changes are saved even if the device loses power. Jan 26, 2016

Does Cisco write command?

The write commands are used to work with the current configuration. … Description. Write command Equivalent write erase erase startup-config write memory copy running-config startup-config write network copy running-config tftp write terminal show running-config

Which is the router command used to copy the running configuration to Nvram?

On all platforms except Class A file system platforms, the copy system:running-config nvram:startup-config command copies the currently running configuration to NVRAM.

Why would the enable secret password allow access to the privileged EXEC mode and the enable password no longer be valid?

Why would the enable secret password allow access to the privileged EXEC mode and the enable password no longer be valid? The enable secret password overrides the enable password. … The service password-encryption command encrypts all current and future passwords. Mar 12, 2018

How do I check my port settings?

You can view the summary or detailed information on the switch ports using the show interface status command. To see the summary information on all ports on the switch, enter the show interface status command with no arguments. Specify a particular module number to see information on the ports on that module only. Apr 20, 2020

What is ip route command?

IP route command is used to configure the static route. Static routes are the most secure way of routing. They will also increase overall network performance. These features are extremely helpful in small network. Aug 6, 2018

Why do we configure switch with an IP address?

If you want to be able to manage your switch remotely over the network, your switch needs an IP address. If your switch has multiple VLANs configured, and you want to be able to manage the switch from each VLAN, the switch requires an IP address on a VLAN interface in each VLAN. Jan 24, 2008

How many files are currently stored in flash?

3 files Complete the following steps to save the startup configuration to flash. a. Examine the contents of flash using the show flashcommand:R1# show flashHow many files are currently stored in flash? There are a total of 3 files stored here.

Is there an IP address set on the switch?

An IP address and subnet mask is configured on the management SVI of the switch from VLAN interface configuration mode. Mar 31, 2014

Why does the router respond with the startup config is not present message?

Why does the router respond with the startup-config is not present message? It displays this message because the configuration file was not saved to NVRAM. Currently it is only located in RAM. Oct 25, 2019

Why is it necessary to erase the startup configuration?

Why is it necessary to erase the startup configuration before reloading the router? Answer: It is necessary to erase the startup configuration before reloading so that previous configurations would be reset and it won’t be hard to troubleshoot if an error occurs. It is so that we wills tart with a clean state.

What command deletes the VLAN file stored in the switches?

Information held in this location can not be deleted by erasing the start-up config. To delete the vlan database on a Cisco switch, simply go to the privilege mode and issue the command #delete vlan. dat, reload the switch and all your vlans will be gone. For a step-by-step approach on how it is done, see video below. Aug 15, 2017

Which command will show you the IOS version running on your router?

Which command will show you the IOS version running on your router? Explanation: The best answer is show version, which shows you the IOS file running currently on your router. The show flash command shows you the contents of flash memory, not which file is running.

How do I backup my HP switch using PuTTY?

HP Procurve – Backup and Restore a Configuration Launch Putty, select the COM port of your serial to USB adapter and click “Serial” Select “Session” from the left hand pane and adjust the settings as shown below. … Click open. Log into the device using the log in credentials. Issue the following command, “#Terminal Length 400” … Next issue the “#Show Run” command. Mar 19, 2015

How is SSH different from telnet?

SSH makes connections over the network, whereas Telnet is for out-of-band access. SSH provides security to remote sessions by encrypting messages and using user authentication. … SSH must be configured over an active network connection, whereas Telnet is used to connect to a device from a console connection. Mar 4, 2020

How do I backup PuTTY files?

How to Copy and Back Up PuTTY Sessions and Settings to Another PC Windows Command Prompt. Firstly, make sure that all PuTTY windows are closed. … Export PuTTY Settings and Sessions. … Export PuTTY Sessions Only. … Importing PuTTY Settings and Sessions to Another PC. … While You’re Still Here.. Feb 6, 2021

The running configuration is stored in RAM; the startup configuration is stored in NVRAM. To display the current running configuration, enter the show runningconfig command. Enter the copy runningconfig startupconfig command to save the current running configuration to the startup configuration file in NVRAM.

How do I save my running config?

Save the Configuration Type “copy running-config startup-config” at the command line and press return on the keyboard. This will copy the current switch configuration to the non-volatile memory, which is memory that will retain its data even without power applied to it. Dec 7, 2011

How do I download Cisco running config?

Downloading Startup and Running Config Files from Cisco Devices Click the Tools tab. Choose Config File Manager available under the CISCO Tools category. To configure SNMP properties click Settings located at the top right corner or click Admin -> Settings. … Enter the Device Name or its IP Address. More items…

How do I save my Nexus config?

To change the startup configuration file, you can either save the running-configuration file to the startup configuration using the copy running-config startup-config command or copy a configuration file from a file server to the startup configuration. Jul 13, 2017

Where is the running configuration stored?

The running configuration file stores the configuration changes made while the router is up and running. The “”running-config”” file is stored in RAM.

What is the command to save the running config to startup config?

To display the current running configuration, enter the show running-config command. Enter the copy running-config startup-config command to save the current running configuration to the startup configuration file in NVRAM. To display the startup configuration, enter the show startup-config command. Nov 2, 2007

How do I copy TFTP to running config?

Log in > Go to enable mode > issue a “copy tftp running-config”* command > Supply the IP address of the TFTP server > Give the backup file a name. Note: You can also use startup-config to restore the config saved in NVRAM rather than the running-config.

How do I download config files?

To download a configuration file: Go to Device Manager > Device & Groups and select a device group. In the lower tree menu, select a device. … In the dashboard, locate the Configuration and Installation Status widget. In the Total Revisions row, click Revision History. Select the revision you want to download. More items…

What command is used to create a backup configuration?

What command is used to create a backup configuration? Explanation: The command to back up the configuration on a router is copy running-config startup-config.

How can I download config file from TFTP server?

Step 1: Copy the configuration file to the appropriate TFTP directory on the workstation. Step 2: Verify that the TFTP server is properly. Step 3: Log into the access point through a Telnet session. Step 4: Download the configuration file from the TFTP server to configure the access point.

How do I save my Nexus 9k config?

To change the startup configuration file, you can either save the running-configuration file to the startup configuration using the copy running-config startup-config command or copy a configuration file from a file server to the startup configuration. May 31, 2017

How do I delete a Cisco Nexus config?

Procedure Erase the existing configuration: write erase. Reload the switch software: reload. The system reboots and enters the configuration wizard. … In the configuration wizard, enter the basic switch settings: Admin password. … When prompted, enter the user name and password to log in to the switch.

How do I reset my Nexus switch?

For Cisco Nexus 5000 Series switches, you must press Ctrl-R (Ctrl+Shift+R). switch# reload This command will reboot the system.

What is running configuration?

The running-configuration is the config that is in the router’s memory. You change this config when you make changes to the router. Keep in mind that config is not saved until you do a copy running-configuration startup-configuration. This command can be abbreviated sh run. Jun 12, 2008

What is the difference between write memory and copy running config startup config?

They essentially achieve the same things by saving the running configuration to the memory so that after a reload it retains the same configuration. Write memory is the “ancient” way, and copy running-config startup-config is the “newer way”. … – as opposed to just saving the configuration. Aug 5, 2018

Do show running config?

Show running-config: To display the configuration information currently running on the terminal, use the show running-config EXEC command. This command replaces the write terminal command. Syntax Description: This command has no arguments or keywords. Nov 29, 2013

What is the shortest version of copy running config startup config?

What is the shortest, abbreviated version of the copy running-config startup-config command? The shortest, abbreviated version of the copy running-config startup-config command is “copy run start”.

How do I get rid of running config?

To clear out the running config file, simply erase the startup config file and then reload the device. Sep 10, 2019

How do I save a running config in putty?

Backup Cisco Configs Using Putty Launch putty and connect to your Cisco router/switch. … Go to Session and click on Logging, select “Log all session output” Click on Browse and choose the location and name of the file (I like to place my config file on my desktop – C:\Documents and Settings\Administrator\Desktop\config.txt) Jun 12, 2012

What is a TFTP server?

TFTP Server is used for simple file transfer (typically for boot-loading remote devices). Trivial File Transfer Protocol (TFTP) is a simple protocol for exchanging files between two TCP/IP machines. … The TFTP Server can also be used to upload HTML pages onto the HTTP Server or to download log files to a remote PC.

What does copy run start do?

copy run start generates a new configuration file and overwrites entirely the previous configuration file. … This means that running configuration lines that aren’t in the startup configuration won’t be overwritten or removed. The result is usually a messy, incomplete configuration. May 17, 2010

How do I download OpenVPN config file?

Where Can I Download OpenVPN Configuration Files? Visit our Servers page. OpenVPN configuration files are located on our Servers page and you can visit it by clicking (this link) Choose a server location. Once on Servers page, scroll down to choose a server location you would like to connect to. … Download configuration files. Aug 27, 2019

How do I open a config file?

Programs that open CONFIG files File Viewer Plus. Free Trial. Microsoft Visual Studio 2019. Free+ Adobe Dreamweaver 2020. Free Trial. Microsoft Notepad. Included with OS. Microsoft WordPad. Included with OS.

How do I import a config file into FortiClient?

Restoring a Forticlient configuration file Download the FortiClient using one of the following links: After Installation, Open the FortiClient, and go to File -> Settings: Go to Restore: Choose the config file you want to upload: After approval, you will be prompted by the following: Go to View -> Dashboard : More items…

How do I backup my switch configuration?

Use an FTP Server to Backup and Restore a Configuration At the Router> prompt, issue the enable command, and provide the required password when prompted. … Configure the FTP username and password. … Copy the configuration to the FTP server. … Open the configuration file with a text editor. Aug 3, 2006

How do I backup my router settings?

How to backup and restore the settings configured in a router Log in to the router. By default, User Name is “admin” and Password is “password”. In the menu, under Maintenance, click Backup settings. Click the Backup button. Then select a location on your PC to save the file.

How do I find the config file on my router?

Download a config from Cisco router or switch Click Select Router, and then specify the IP address or host name of the device. Select community string, or SNMP version 3 credentials. To test the credentials, click Test. Click OK. If prompted, store the credentials you specified in the shared credentials database. Click Download. More items…

How do I upload a config to a Cisco switch?

Connect to the switch/router that needs the configuration. Open the config.txt file. Highlight the entire contents of the config.txt file. … Copy the selected text to the Windows clipboard. … Switch to the HyperTerminal window, and issue the configure terminal command at the Router# prompt. More items… • Aug 29, 2014

How do I backup configuration files in Hana?

For third-party backup tools (Backint for SAP HANA), the backup destination is always /usr/sap//SYS/global/hdb/backint for both data backup and log backups. For third-party backup tools, you can only change the log backup interval. Specify a size limit for the data backup files (if required).

What is copy running config startup config?

Copy running-config startup-config or copy run start command copies the current active configuration to NVRAM. d. Erase startup-config will enable you to completely delete all configurations on the router so that you can start from scratch. Type this command to delete the configuration file in NVRAM.

How do I check logs on Nexus switch?

To view your switch logs or related configuration information, use any of the following commands: show logging console. … show logging last number. … show logging logfile [ start-time yyyy mmm dd hh : mm : ss ] [ end-time yyyy mmm dd hh : mm : ss ]

How do I delete a VLAN DAT file?

Deleting the VLAN Database from a Cisco Switch 1) Deleting the switch configuration. This is the easy part. … Switch#erase startup-config. … Switch#reload. 2) Deleting the switch Vlans. … Switch#show vlan brief. … Switch#show flash: … Switch#delete vlan.dat. … Switch#sh flash. More items…

How do I reset my Cisco 3560 to factory settings?

First you need to power down the switch. Once the switch is powered off, hold down the mode button, and power the switch on. The switch will boot up and you should see the switch prompt as shown below. Sep 29, 2015

How do I reset my Cisco 3750 to factory settings?

There is another method: Break the stack; Power up the switch individually; Hold down the “Mode” button for 30 seconds and release; The switch will reboot into factory default; Console into the switch; Delete the files VLAN.dat, VLAN.dat.backup, config.text, config.text.backup. Renumber the stack. Oct 11, 2016

How do you reset a 2960 switch?

Procedure to reset a Cisco 2960 (or 2950) to factory defaults by deleting the configuration files. Connect the blue console cable, and open a TTY session: 9600,8,n,1. – Hitting return should give a prompt, confirming the connection. Press and hold the front panel MODE button, and power-up the switch.

How do you reset a 3850 switch?

Power cycle the switch. Immediatly press and hold the Mode button. Hold the button for approximately 12 seconds, the Status LED will go amber. On the console you should be in Boot Loader. Jan 6, 2017

What is the command to reset a Cisco switch?

Reset a switch running Cisco IOS Software to factory defaults Enter “enable” mode by typing: … The console prompt should change from “switch>” to “switch#” to signify this. To reset the switch to factory default, issue the erase startup-config or write erase command. More items… • Mar 7, 2018

What is show startup config?

For all platforms except the Cisco 7000 family, the show startup-config command shows the version number of the software used when you last executed the copy running-config startup-config command. … The Cisco IOS software informs you whether the displayed configuration is a complete configuration or a distilled version.

Why would a technician enter the command copy startup config running config?

Why would a technician enter the command copy startup-config running-config? … Changes to the configuration on an IOS device take effect as soon as the command is typed correctly and the Enter key has been pressed. A network administrator has forgotten the argument of an IOS command.

What is the difference between running configuration and start up configuration?

A running configuration resides in a device’s RAM, so if a device loses power, all configured commands will be lost. … A startup configuration is stored in the nonvolatile memory of a device, which means that all configuration changes are saved even if the device loses power. Jan 26, 2016

Does Cisco write command?

The write commands are used to work with the current configuration. … Description. Write command Equivalent write erase erase startup-config write memory copy running-config startup-config write network copy running-config tftp write terminal show running-config

Which is the router command used to copy the running configuration to Nvram?

On all platforms except Class A file system platforms, the copy system:running-config nvram:startup-config command copies the currently running configuration to NVRAM.

Why would the enable secret password allow access to the privileged EXEC mode and the enable password no longer be valid?

Why would the enable secret password allow access to the privileged EXEC mode and the enable password no longer be valid? The enable secret password overrides the enable password. … The service password-encryption command encrypts all current and future passwords. Mar 12, 2018

How do I check my port settings?

You can view the summary or detailed information on the switch ports using the show interface status command. To see the summary information on all ports on the switch, enter the show interface status command with no arguments. Specify a particular module number to see information on the ports on that module only. Apr 20, 2020

What is ip route command?

IP route command is used to configure the static route. Static routes are the most secure way of routing. They will also increase overall network performance. These features are extremely helpful in small network. Aug 6, 2018

Why do we configure switch with an IP address?

If you want to be able to manage your switch remotely over the network, your switch needs an IP address. If your switch has multiple VLANs configured, and you want to be able to manage the switch from each VLAN, the switch requires an IP address on a VLAN interface in each VLAN. Jan 24, 2008

How many files are currently stored in flash?

3 files Complete the following steps to save the startup configuration to flash. a. Examine the contents of flash using the show flashcommand:R1# show flashHow many files are currently stored in flash? There are a total of 3 files stored here.

Is there an IP address set on the switch?

An IP address and subnet mask is configured on the management SVI of the switch from VLAN interface configuration mode. Mar 31, 2014

Why does the router respond with the startup config is not present message?

Why does the router respond with the startup-config is not present message? It displays this message because the configuration file was not saved to NVRAM. Currently it is only located in RAM. Oct 25, 2019

Why is it necessary to erase the startup configuration?

Why is it necessary to erase the startup configuration before reloading the router? Answer: It is necessary to erase the startup configuration before reloading so that previous configurations would be reset and it won’t be hard to troubleshoot if an error occurs. It is so that we wills tart with a clean state.

What command deletes the VLAN file stored in the switches?

Information held in this location can not be deleted by erasing the start-up config. To delete the vlan database on a Cisco switch, simply go to the privilege mode and issue the command #delete vlan. dat, reload the switch and all your vlans will be gone. For a step-by-step approach on how it is done, see video below. Aug 15, 2017

Which command will show you the IOS version running on your router?

Which command will show you the IOS version running on your router? Explanation: The best answer is show version, which shows you the IOS file running currently on your router. The show flash command shows you the contents of flash memory, not which file is running.

How do I backup my HP switch using PuTTY?

HP Procurve – Backup and Restore a Configuration Launch Putty, select the COM port of your serial to USB adapter and click “Serial” Select “Session” from the left hand pane and adjust the settings as shown below. … Click open. Log into the device using the log in credentials. Issue the following command, “#Terminal Length 400” … Next issue the “#Show Run” command. Mar 19, 2015

How is SSH different from telnet?

SSH makes connections over the network, whereas Telnet is for out-of-band access. SSH provides security to remote sessions by encrypting messages and using user authentication. … SSH must be configured over an active network connection, whereas Telnet is used to connect to a device from a console connection. Mar 4, 2020

How do I backup PuTTY files?

How to Copy and Back Up PuTTY Sessions and Settings to Another PC Windows Command Prompt. Firstly, make sure that all PuTTY windows are closed. … Export PuTTY Settings and Sessions. … Export PuTTY Sessions Only. … Importing PuTTY Settings and Sessions to Another PC. … While You’re Still Here.. Feb 6, 2021