Switch on the fan you are programming and hold the power button for up to 30sec. Turn On and change the speed setting to confirm successful pairing.

Where is the DIP switch on a ceiling fan? The DIP switches for the receiver are located on the flat surface of the receiver. The DIP switches for the transmitter are in the battery compartment. 4-4. Raise the fan and align the slots in the canopy with the hooks on the ceiling plate.

how do you connect a remote to a ceiling fan?

You can pair the fan with remote using the following steps:
  1. Disconnect the power from the fan.
  2. Turn the power on after two minutes.
  3. Within those two minutes, press and hold the light button and fan button on the remote simultaneously for five seconds.
  4. You should see lights flashing.

How do I sync my Harbor Breeze Fan Remote? Replace the remote battery and battery compartment cover. Restore the electricity to your Harbor Breeze fan by flipping the appropriate circuit breaker switch back to the "On" position. Press the "Hi," "Med" and "Lo" buttons on the remote control within 20 seconds to synchronize it to the fan.

how do I turn my ceiling fan on without a remote?

To control a remote-controlled ceiling fan without using the remote, add a pull cord to the pull switch on the motor module. The pull cord can be purchased from a hardware store or garden and patio shop, while the tools needed are already in most households.

Why is my fan remote not working? If you are using a remote control, check that the batteries are installed properly and are not dead. Check that the dip switches on the remote and receiver are set to the same frequency. If you're using a wall control, check the power to the breaker from your control and try working your ceiling fan manually.

how do I reset my ceiling fan remote?

Turn the fan power off and back on at the wall switch (or circuit breaker if necessary). Within three minutes of restoring power to the fan, press and hold both the Fan button and the Light button on the handheld remote for at least four seconds.

Can you get a universal remote for ceiling fan? There are many “universal” ceiling fan remote control kits on the market for overhead fans controlled by pull chains and a singe wall switch. All of them feature on/off and fan speed control. Others also offer light-dimming and thermostatic control capabilities.

How do I reset my Hampton Bay fan remote?

Reset your remote control. First, turn off the power. Then remove the batteries from the remote and wait 10 seconds. Replace the batteries and turn the power back on.

Is there an app to control my ceiling fan? fanSync gives you the ability to control your AC ceiling fan with your Android device.

Do all ceiling fans have a reverse switch?

Most fans have a simple switch to reverse direction. Look up from underneath the fan to see if it's turning the right way. Now, that's not all you need to know about the energy savings from a ceiling fan. The clockwise or counter-clockwise effect only works if the fan blades are angled properly.