- Turn off the TV and unplug it from the wall.
- Find the reset button on the side of the TV. It looks like a tiny hole that only a paperclip can enter.
- Press and hold this reset button for at least 30 seconds.
- Power the TV back on.
How do I reset my TCL Roku TV without a remote?
To reset Roku TV without a remote, locate the reset button on the back of the TV, press it to start factory reset, or use the Roku Remote App. In case the reset button is not present on the Roku TV, press mute and power buttons together.
How do I manually reset my TCL TV?
Why does my TCL Roku TV have a black screen?
If a TCL Roku TV’s screen has gone black but the audio still works, it is mostly due to loose cable connections or a hardware issue affecting your TV’s LED lighting. Unplugging the TV from all cable connections, including power, and then plugging it back in after 5-10 minutes resolves the issue.
What to do when your TV turns on but the screen is black?
A hidden fault within HDMI cable – Replace with new High-Speed HDMI 2.0 cable. Replace the HDMI cable as it may have a short or another defect which causes the black screen issue. Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues.
Locate the pinhole Reset button on the back of your TV, near the antenna, HDMI, and audio connections. Using a straightened paperclip (or similar), press and hold the reset button for at least 20 seconds. After a moment, your Roku TV will restart and display the Recovery Mode screen.
Can you reset Roku TV?
To reset your Roku device, press the Home button on your remote. Then go to Settings > System > Advanced system settings. Next, choose Factory reset and enter the code on your screen. Finally, select OK and wait for your Roku device to restart.
What is wrong with my TCL Roku TV?
If TCL Roku is not working, try restarting the TV, position the router closer to the TV, reboot the TV and router at the same time, perform a system restart, check for any software updates, check the TV’s audio settings, and be sure all cables are secured, among other solutions.
Does unplugging a Roku reset it?
The good news is all your settings are saved. The bad news is you’ll have to do this on a regular basis because the roku will hang, and unplugging and plugging it back in is the only way to make it work again.
Why is there no picture on my TCL TV?
Restart the TV. The location of the power button on most models in underneath TCL logo on the bottom of the TV or behind the TV towards the right edge. Please consult your user’s manual for the exact location. Unplug the TV from the power outlet. After 30 seconds, plug the TV back.
Why is there no picture on my Roku TV?
Check that the video cable is firmly connected to the back of your Roku player and to the HDMI or composite connector on the TV. If you have a Roku Streaming Stick, then make sure it is firmly connected to the HDMI connector on your TV.
How do you fix a TCL TV that wont turn on?
- Press the Home button on your remote.
- Open the Settings option.
- Select Apps.
- Select each of the apps you want to clear. You can choose them all for better results.
- Go to Clear Cache.
- Press OK.
- Now, you should restart your TV.
How do I restore my Roku after factory reset?
- Press Home on your Roku remote.
- Scroll and select Settings.
- Select Advanced system settings.
- Select Network connection reset.
- Select Reset connection.
How do I reset my TV to factory settings?
Select Watching TV or TV. Select Settings. The next steps will vary depending on your TV menu options: Select Device Preferences → Reset → Factory data reset → Erase everything → Yes.
Performing a factory reset will remove all stored personal data relating to your settings, network connections, Roku data, and menu preferences. Once completed, you must repeat the guided setup, reconnecting to the Internet, re-linking your Roku account, and reloading streaming channels.
How do you reset a TCL Smart TV?
- Press the Settings button on your remote control.
- Select More Settings > Device Preferences > About > Restart.
- Select Restart to confirm.
How do I fix a problem on my TCL Smart TV app?
- Check the status of your Internet connection.
- Turn on System Speedup located the top right corner of the Home screen (Launcher)
- Re-try downloading the app again.
Does unplugging TV reset it?
Disconnecting the TV from the power supply does not reset the TV, it just turns it off as if it were turned off and switched on via the remote control. If you want to perform a factory reset, you can usually do so via the configuration menu or a button located somewhere on the TV.
Why do I have to keep unplugging Roku?
Rokus are designed to stay on and consume little power. Roku devices don’t have a power button or standby mode. If your Roku is powered by a USB port on your TV, it will shut down when you turn the TV off. To turn off Roku devices that are powered via a wall outlet, you will need to unplug them.
Why do I have to reboot my Roku?
Roku streaming players that connect to the USB port on your TV will lose power when the television is turned off. Also, depending on your television, many will lose power when the TV goes into standby. This means that your Roku device must “boot-up” every time the TV is turned on.
Why won't my Roku TV won't turn on?
How Do I Fix My Roku That Won’t Turn On? First, make sure that your power cable is connected properly and plugged in. If it still won’t turn on, remove the power cable for five seconds, and then plug it back in. If that fails then you will have to reset your Roku device using the reset button.
How do I connect my Roku to WIFI without a remote?
Even without the physical remote, you can use your phone to connect your Roku device to your Wi-Fi network. To do this, download the Roku remote app for Android or iOS. When the app starts the first time, it will walk you through its different options—including how to use it as a Roku remote replacement.
How do I reset my TV to factory settings without a remote?
- Select System → About → Reset → Factory data reset → Erase everything → Yes.
- Select Device Preferences → Reset → Factory data reset → Erase everything → Yes.
- Select Storage & reset → Factory data reset → Erase everything → Yes.
How do I reset my Roku element?
How do I reset my China Smart TV?
How do I reset my Roku when it freezes?
- Press the Home button 5 times.
- Press the Up arrow once.
- Press the Rewind button twice.
- Press the Fast Forward button twice.
- The restart will begin, though it may take a few seconds.